{"id":2646,"date":"2025-10-29T20:13:14","date_gmt":"2025-10-29T20:13:14","guid":{"rendered":"https:\/\/new-ageco.com\/?post_type=product&p=2646"},"modified":"2025-10-30T20:43:56","modified_gmt":"2025-10-30T20:43:56","slug":"strut-clamp-two-piece-channel-clip","status":"publish","type":"product","link":"https:\/\/new-ageco.com\/ar\/product\/strut-clamp-two-piece-channel-clip\/","title":{"rendered":"STRUT CLAMP \u2013 TWO PIECE CHANNEL CLIP"},"content":{"rendered":"

Product Designation System<\/b><\/h3>\n

NAC-TPCC-XX | NAC = New Age Corporation | TPCC = Two Piece Channel Clip | XX = Nominal pipe size (imperial)<\/b><\/p>\n

Complete Technical Specifications<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n
Specification<\/b><\/td>\nDetails<\/b><\/td>\nSpecification<\/b><\/td>\nDetails<\/b><\/td>\n<\/tr>\n
Material (Clamp)<\/b><\/td>\nMild Steel (ES 138 \/ A36)<\/span><\/td>\nConstruction<\/b><\/td>\nTwo-piece bolted assembly<\/span><\/td>\n<\/tr>\n
Pipe Size Range<\/b><\/td>\nDN15 to DN100 (\u00bd” to 4″)<\/span><\/td>\nMovement Type<\/b><\/td>\nAxial (longitudinal) sliding<\/span><\/td>\n<\/tr>\n
Finish Options<\/b><\/td>\nElectro-Galv \/ Hot-Dip \/ Pre-Galv \/ Plain<\/span><\/td>\nOperating Temp<\/b><\/td>\n-20\u00b0C to +150\u00b0C<\/span><\/td>\n<\/tr>\n
Channel Compatibility<\/b><\/td>\n41\u00d741mm, 41\u00d782mm strut channels<\/span><\/td>\nFastener Included<\/b><\/td>\nM6\u00d725, M8\u00d740 (size dependent)<\/span><\/td>\n<\/tr>\n
Installation Method<\/b><\/td>\nBolted to channel \u2013 no welding<\/span><\/td>\nGuidance Function<\/b><\/td>\nPrevents lateral movement only<\/span><\/td>\n<\/tr>\n
Load Type<\/b><\/td>\nGuide only (not load-bearing riser support)<\/span><\/td>\nStandards<\/b><\/td>\nEgyptian Code \/ MSS SP-58<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Product Range & Dimensional Specifications<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
Product Code<\/b><\/td>\nNominal Pipe Size<\/b><\/td>\nPipe OD (mm)<\/b><\/td>\nDimension A (mm)<\/b><\/td>\nDimension B (mm)<\/b><\/td>\nDimension C (mm)<\/b><\/td>\nFastener Size<\/b><\/td>\n<\/tr>\n
NAC-TPCC 22<\/b><\/td>\n\u00bd” (DN15)<\/span><\/td>\n15\u201322<\/span><\/td>\n50.5<\/span><\/td>\n14.2<\/span><\/td>\n25.00<\/span><\/td>\nM6 \u00d7 25<\/span><\/td>\n<\/tr>\n
NAC-TPCC 27<\/b><\/td>\n\u00be” (DN20)<\/span><\/td>\n20\u201327<\/span><\/td>\n57.1<\/span><\/td>\n17.5<\/span><\/td>\n30.00<\/span><\/td>\nM6 \u00d7 25<\/span><\/td>\n<\/tr>\n
NAC-TPCC 34<\/b><\/td>\n1″ (DN25)<\/span><\/td>\n25\u201334<\/span><\/td>\n63.8<\/span><\/td>\n20.6<\/span><\/td>\n38.00<\/span><\/td>\nM6 \u00d7 25<\/span><\/td>\n<\/tr>\n
NAC-TPCC 42<\/b><\/td>\n1\u00bc” (DN32)<\/span><\/td>\n32\u201342<\/span><\/td>\n76.2<\/span><\/td>\n25.4<\/span><\/td>\n46.00<\/span><\/td>\nM6 \u00d7 25<\/span><\/td>\n<\/tr>\n
NAC-TPCC 48<\/b><\/td>\n1\u00bd” (DN40)<\/span><\/td>\n40\u201348<\/span><\/td>\n81.5<\/span><\/td>\n28.4<\/span><\/td>\n52.00<\/span><\/td>\nM6 \u00d7 25<\/span><\/td>\n<\/tr>\n
NAC-TPCC 60<\/b><\/td>\n2″ (DN50)<\/span><\/td>\n50\u201360<\/span><\/td>\n95.8<\/span><\/td>\n34.8<\/span><\/td>\n65.00<\/span><\/td>\nM8 \u00d7 40<\/span><\/td>\n<\/tr>\n
NAC-TPCC 73<\/b><\/td>\n2\u00bd” (DN65)<\/span><\/td>\n65\u201373<\/span><\/td>\n108.7<\/span><\/td>\n41.1<\/span><\/td>\n78.00<\/span><\/td>\nM8 \u00d7 40<\/span><\/td>\n<\/tr>\n
NAC-TPCC 89<\/b><\/td>\n3″ (DN80)<\/span><\/td>\n80\u201389<\/span><\/td>\n128.3<\/span><\/td>\n50.8<\/span><\/td>\n94.00<\/span><\/td>\nM8 \u00d7 40<\/span><\/td>\n<\/tr>\n
NAC-TPCC 114<\/b><\/td>\n4″ (DN100)<\/span><\/td>\n100\u2013114<\/span><\/td>\n153.7<\/span><\/td>\n63.5<\/span><\/td>\n120.00<\/span><\/td>\nM8 \u00d7 40<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Dimensional Reference<\/b><\/h3>\n
    \n
  • A:<\/b> Total height from channel base to top of clamp<\/span><\/li>\n
  • B:<\/b> Clamp width (lateral dimension)<\/span><\/li>\n
  • C:<\/b> Clamp depth (fore-aft dimension perpendicular to pipe axis)<\/span><\/li>\n<\/ul>\n

    Note: Dimensions allow for pipe OD variation due to different schedules (Schedule 10, 40, 80) and insulation thickness. Verify actual pipe OD before ordering.<\/span><\/i><\/p>\n

    Material & Finish Specifications<\/b><\/h2>\n\n\n\n\n\n\n\n
    Finish Type<\/b><\/td>\nCoating Specification<\/b><\/td>\nRecommended Application<\/b><\/td>\n<\/tr>\n
    Electro-Galvanized (EG)<\/b><\/td>\n12\u201325 \u03bcm per ASTM B633<\/span><\/td>\nIndoor mechanical corridors, dry environments<\/span><\/td>\n<\/tr>\n
    Hot-Dip Galvanized (HDG)<\/b><\/td>\n\u226555 \u03bcm per ASTM A153<\/span><\/td>\nOutdoor pipe racks, coastal zones, high-humidity areas<\/span><\/td>\n<\/tr>\n
    Pre-Galvanized (PG)<\/b><\/td>\nStandard mill coating per ASTM A653<\/span><\/td>\nGeneral construction, moderate indoor conditions<\/span><\/td>\n<\/tr>\n
    Plain (Uncoated)<\/b><\/td>\nNo coating<\/span><\/td>\nPaint-ready installations or controlled environments<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

    Pipe Guidance Application<\/b><\/h2>\n

    Primary Function: Guided Movement<\/b><\/h3>\n

    The Strut Clamp \u2013 Two Piece Channel Clip performs a specific and critical function in piping systems:<\/span><\/p>\n

    What It DOES:<\/b><\/p>\n

      \n
    • \u2713 Guides pipe along strut channel path (prevents lateral\/vertical displacement)<\/span><\/li>\n
    • \u2713 Allows controlled axial (longitudinal) movement for thermal expansion\/contraction<\/span><\/li>\n
    • \u2713 Maintains pipe alignment through temperature cycles<\/span><\/li>\n
    • \u2713 Prevents pipe from lifting off or falling out of support structure<\/span><\/li>\n
    • \u2713 Distributes lateral loads (wind, seismic) to strut channel framework<\/span><\/li>\n<\/ul>\n

      What It DOES NOT Do:<\/b><\/p>\n

        \n
      • \u2717 Does NOT carry vertical dead weight (use riser clamps or pipe hangers for load bearing)<\/span><\/li>\n
      • \u2717 Does NOT provide vibration isolation (use EPDM-lined hangers for acoustic control)<\/span><\/li>\n
      • \u2717 Does NOT act as a rigid anchor (use anchor supports to restrain expansion)<\/span><\/li>\n<\/ul>\n

        Typical Installation Locations<\/b><\/h3>\n
          \n
        • Long horizontal pipe runs on strut channel racks (>10m) subject to temperature change<\/span><\/li>\n
        • HVAC chilled water and hot water distribution corridors<\/span><\/li>\n
        • Fire protection system loops with temperature variations<\/span><\/li>\n
        • Roof piping support frames exposed to weather<\/span><\/li>\n
        • Industrial process piping with thermal cycling<\/span><\/li>\n
        • Mechanical tunnels and underground utility corridors<\/span><\/li>\n<\/ul>\n

          Critical Design Distinction: Guide vs. Anchor<\/b><\/h3>\n

          In a properly designed piping system with thermal expansion:<\/span><\/p>\n\n\n\n\n\n\n
          Component<\/b><\/td>\nFunction<\/b><\/td>\nLocation<\/b><\/td>\nMovement<\/b><\/td>\n<\/tr>\n
          Anchor<\/b><\/td>\nRestrains pipe in all directions<\/span><\/td>\nFixed points (equipment, turns)<\/span><\/td>\nZero movement<\/span><\/td>\n<\/tr>\n
          Guide<\/b><\/td>\nAllows axial movement only<\/span><\/td>\nBetween anchors<\/span><\/td>\nSlides longitudinally<\/span><\/td>\n<\/tr>\n
          Support<\/b><\/td>\nCarries vertical load<\/span><\/td>\nThroughout run<\/span><\/td>\nMay allow movement<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

          The Strut Clamp \u2013 Two Piece Channel Clip is a GUIDE.<\/b> It must be used in combination with proper anchors and load-bearing supports per mechanical design calculations.<\/span><\/p>\n

          Application Selection Guide<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n
          System<\/b><\/td>\nTypical Use<\/b><\/td>\nRecommended Sizes<\/b><\/td>\nFinish<\/b><\/td>\nSpacing<\/b><\/td>\n<\/tr>\n
          HVAC Chilled Water<\/b><\/td>\nCorridor distribution racks<\/span><\/td>\nDN40\u2013DN100<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\n3\u20135m<\/span><\/td>\n<\/tr>\n
          HVAC Hot Water<\/b><\/td>\nHeating system mains<\/span><\/td>\nDN32\u2013DN80<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\n3\u20135m<\/span><\/td>\n<\/tr>\n
          Fire Protection<\/b><\/td>\nSprinkler loop distribution<\/span><\/td>\nDN50\u2013DN100<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\nPer NFPA 13<\/span><\/td>\n<\/tr>\n
          Process Piping<\/b><\/td>\nIndustrial plant piping<\/span><\/td>\nDN25\u2013DN100<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\n4\u20136m<\/span><\/td>\n<\/tr>\n
          Utility Distribution<\/b><\/td>\nGeneral service piping<\/span><\/td>\nDN25\u2013DN50<\/span><\/td>\nElectro-Galvanized<\/span><\/td>\n3\u20135m<\/span><\/td>\n<\/tr>\n
          Roof Piping<\/b><\/td>\nOutdoor exposed runs<\/span><\/td>\nDN25\u2013DN80<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\n3\u20134m<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

          Thermal Expansion Considerations<\/b><\/h2>\n

          Why Guided Movement Matters<\/b><\/h3>\n

          When a pipe heats or cools, it expands or contracts. For steel pipe, the thermal expansion coefficient is approximately 11.7 \u00d7 10\u207b\u2076 per \u00b0C.<\/span><\/p>\n

          Example Calculation:<\/b><\/p>\n

            \n
          • Pipe length: 50m<\/span><\/li>\n
          • Temperature change: 60\u00b0C (e.g., 20\u00b0C ambient to 80\u00b0C operating)<\/span><\/li>\n
          • Expansion: 50m \u00d7 11.7 \u00d7 10\u207b\u2076 \u00d7 60\u00b0C = <\/span>35mm movement<\/b><\/li>\n<\/ul>\n

            Without proper guides, this 35mm expansion can cause:<\/span><\/p>\n

              \n
            • Pipe to buckle or snake laterally<\/span><\/li>\n
            • Joints to leak at connections<\/span><\/li>\n
            • Supports to fail due to lateral forces<\/span><\/li>\n
            • Equipment nozzles to overstress<\/span><\/li>\n<\/ul>\n

              Solution:<\/b> Place guided supports (like the Strut Clamp) between rigid anchors to direct expansion in a controlled direction.<\/span><\/p>\n

              Guide Spacing Guidelines<\/b><\/h3>\n\n\n\n\n\n\n
              Pipe Size<\/b><\/td>\nRecommended Guide Spacing<\/b><\/td>\nTypical Between Anchors<\/b><\/td>\n<\/tr>\n
              DN15\u2013DN25<\/span><\/td>\n3\u20134m<\/span><\/td>\n15\u201320m<\/span><\/td>\n<\/tr>\n
              DN32\u2013DN50<\/span><\/td>\n4\u20135m<\/span><\/td>\n20\u201330m<\/span><\/td>\n<\/tr>\n
              DN65\u2013DN100<\/span><\/td>\n5\u20136m<\/span><\/td>\n30\u201340m<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

              Note: First guide should be placed close to anchor (typically 1\u20132m away) to establish direction of movement.<\/span><\/i><\/p>\n

              Installation Requirements<\/b><\/h2>\n

              Pre-Installation Planning<\/b><\/h3>\n

              System Design Verification:<\/b><\/p>\n

                \n
              • Confirm piping system has been analyzed for thermal expansion per ASME B31.1 or B31.3<\/span><\/li>\n
              • Identify anchor locations on mechanical drawings<\/span><\/li>\n
              • Verify guide spacing between anchors per design calculations<\/span><\/li>\n
              • Ensure strut channel framework is adequately braced for lateral loads<\/span><\/li>\n<\/ul>\n

                Component Selection:<\/b><\/p>\n

                  \n
                • Select clamp size based on actual pipe OD (including insulation if applicable)<\/span><\/li>\n
                • Verify strut channel size (41\u00d741mm or 41\u00d782mm) matches clamp design<\/span><\/li>\n
                • Confirm channel anchors are adequate for lateral guide forces<\/span><\/li>\n
                • Choose finish based on environmental exposure (HDG for outdoor)<\/span><\/li>\n<\/ul>\n

                  Installation Procedure<\/b><\/h3>\n
                    \n
                  1. Install and verify strut channel framework<\/b><\/li>\n<\/ol>\n

                    Ensure strut channels are level and properly anchored<\/span>
                    \n<\/span> Verify channel is aligned along pipe run direction<\/span>
                    \n<\/span> Check that channel anchors are torqued per structural specifications<\/span><\/p>\n

                      \n
                    1. Position lower half of clamp in channel<\/b><\/li>\n<\/ol>\n

                      Insert lower clamp piece into strut channel slot<\/span>
                      \n<\/span> Position at designed location per piping drawings<\/span>
                      \n<\/span> Ensure clamp seats fully in channel profile<\/span><\/p>\n

                        \n
                      1. Place pipe into clamp<\/b><\/li>\n<\/ol>\n

                        Lift pipe and position in lower clamp cradle<\/span>
                        \n<\/span> Verify pipe is centered in clamp \u2013 not offset to one side<\/span>
                        \n<\/span> Confirm adequate clearance for axial movement (pipe should not bind)<\/span><\/p>\n

                          \n
                        1. Install upper clamp piece<\/b><\/li>\n<\/ol>\n

                          Position upper clamp half around pipe<\/span>
                          \n<\/span> Align bolt holes between upper and lower clamp pieces<\/span>
                          \n<\/span> Insert fasteners (M6\u00d725 or M8\u00d740 depending on size)<\/span><\/p>\n

                            \n
                          1. Tighten clamp \u2013 CRITICAL: Do not over-tighten<\/b><\/li>\n<\/ol>\n

                            Tighten bolts gradually in stages, alternating sides<\/span>
                            \n<\/span> Recommended torque:<\/span><\/p>\n

                              \n
                            • M6\u00d725: 8\u201310 Nm<\/span><\/li>\n
                            • M8\u00d740: 15\u201318 Nm<\/span><\/li>\n<\/ul>\n

                              CRITICAL:<\/b> Clamp should hold pipe snugly but allow sliding movement when pipe expands<\/span>
                              \n<\/span> Test: With hand pressure, verify pipe can slide axially through clamp (should require moderate force)<\/span><\/p>\n

                                \n
                              1. Verify movement clearance before insulation<\/b><\/li>\n<\/ol>\n

                                Manually slide pipe back and forth to confirm free axial movement<\/span>
                                \n<\/span> Check that no obstructions prevent expansion\/contraction<\/span>
                                \n<\/span> If insulation will be added, verify clamp still allows movement with insulation in place<\/span><\/p>\n

                                  \n
                                1. Final system check<\/b><\/li>\n<\/ol>\n

                                  Verify all guides are aligned along pipe run<\/span>
                                  \n<\/span> Confirm anchors are properly restrained<\/span>
                                  \n<\/span> Check that first guide near anchor is positioned correctly<\/span>
                                  \n<\/span> Perform visual inspection of entire support system<\/span><\/p>\n

                                  Installation Best Practices<\/b><\/h3>\n

                                  \u2713 Install guides working from anchor outward along expansion direction<\/span>
                                  \n<\/span> \u2713 Maintain consistent clamp orientation throughout run<\/span>
                                  \n<\/span> \u2713 Use lock washers or lock nuts on all fasteners<\/span>
                                  \n<\/span> \u2713 Mark pipe with paint stripe to monitor expansion movement during startup<\/span>
                                  \n<\/span> \u2713 Avoid installing guides too tight \u2013 pipe must slide freely<\/span><\/p>\n

                                  System Design Example<\/b><\/h2>\n

                                  Typical HVAC Chilled Water Pipe Rack<\/b><\/h3>\n

                                  Scenario:<\/b><\/p>\n

                                    \n
                                  • Pipe: DN80 (3″), 40m long horizontal run<\/span><\/li>\n
                                  • Temperature: 7\u00b0C chilled water (ambient: 30\u00b0C)<\/span><\/li>\n
                                  • Strut channel: 41\u00d782mm, 2.5mm thick<\/span><\/li>\n<\/ul>\n

                                    Support Strategy:<\/b><\/p>\n

                                      \n
                                    1. Anchors:<\/b> Fixed anchors at both ends (at equipment connections)<\/span><\/li>\n
                                    2. Load Supports:<\/b> Pipe hangers every 3.5m to carry vertical weight (8 total)<\/span><\/li>\n
                                    3. Guides:<\/b> Strut clamps (NAC-TPCC 89) every 5m to guide expansion (7 total)<\/span><\/li>\n<\/ol>\n

                                      Thermal Expansion:<\/b><\/p>\n

                                        \n
                                      • \u0394T = 30\u00b0C – 7\u00b0C = 23\u00b0C<\/span><\/li>\n
                                      • Expansion = 40m \u00d7 11.7 \u00d7 10\u207b\u2076 \u00d7 23\u00b0C = <\/span>10.7mm<\/b><\/li>\n
                                      • With anchors at both ends, pipe expands 5.4mm toward each anchor<\/span><\/li>\n<\/ul>\n

                                        Guide Placement:<\/b><\/p>\n

                                          \n
                                        • First guide: 2m from left anchor<\/span><\/li>\n
                                        • Subsequent guides: 5m spacing<\/span><\/li>\n
                                        • Last guide: 2m from right anchor<\/span><\/li>\n<\/ul>\n

                                          This configuration allows controlled expansion while preventing lateral buckling.<\/span><\/p>\n

                                          Why Specify New Age Strut Clamps \u2013 Two Piece Channel Clip?<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n
                                          Advantage<\/b><\/td>\nBenefit to Your Project<\/b><\/td>\n<\/tr>\n
                                          Allows Controlled Axial Movement<\/b><\/td>\nPrevents pipe stress, cracking, and joint failure during temperature changes<\/span><\/td>\n<\/tr>\n
                                          Modular Strut Channel Integration<\/b><\/td>\nZero field welding \u2013 fast installation, easy field adjustments<\/span><\/td>\n<\/tr>\n
                                          Precise Sliding Tolerance<\/b><\/td>\nFactory-set clearance ensures reliable movement without binding<\/span><\/td>\n<\/tr>\n
                                          Multiple Finish Options<\/b><\/td>\nSuitable for indoor, outdoor, and industrial environments<\/span><\/td>\n<\/tr>\n
                                          Standard Thickness Control<\/b><\/td>\nConsistent clamping force across all units \u2013 no field variations<\/span><\/td>\n<\/tr>\n
                                          100% Egyptian Manufacturing<\/b><\/td>\n3\u20137 day delivery (Cairo\/Giza), competitive pricing, local technical support<\/span><\/td>\n<\/tr>\n
                                          Universal Channel Compatibility<\/b><\/td>\nWorks with all standard strut channel systems (not proprietary)<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                                          Product Comparison: Support Types<\/b><\/h2>\n

                                          | Feature | <\/span>Strut Clamp (Guide)<\/b> | <\/span>Pipe Hanger<\/b> | <\/span>Riser Clamp<\/b> | <\/span>Half Saddle<\/b> | |—|—|—|—| | <\/span>Primary Function<\/b> | Guides movement | Carries load (suspended) | Carries load (vertical) | Supports on wall | | <\/span>Vertical Load Capacity<\/b> | Minimal (guide only) | High (460\u20131,200 kg) | High (750\u20135,800 kg) | Moderate (35\u2013350 kg) | | <\/span>Axial Movement<\/b> | \u2713 Allows sliding | \u2717 Rigid | \u2717 Rigid | \u2717 Rigid | | <\/span>Mounting<\/b> | Strut channel | Threaded rod\/ceiling | Floor\/beam | Wall | | <\/span>Typical Spacing<\/b> | 3\u20136m | 2.5\u20134m | Per floor | 1.5\u20133m | | <\/span>Use With<\/b> | Anchors + load supports | Ceiling structure | Structural floors | Vertical walls |<\/span><\/p>\n

                                          Common Installation Mistakes to Avoid<\/b><\/h2>\n

                                          Mistake #1: Using Guides as Load-Bearing Supports<\/b><\/h3>\n

                                          \u274c <\/span>Wrong:<\/b> Installing only strut clamps to support pipe weight<\/span>
                                          \n<\/span> \u2713 <\/span>Correct:<\/b> Use pipe hangers or other load-bearing supports to carry weight; strut clamps guide only<\/span><\/p>\n

                                          Mistake #2: Over-Tightening Clamps<\/b><\/h3>\n

                                          \u274c <\/span>Wrong:<\/b> Tightening clamps until pipe cannot move at all<\/span>
                                          \n<\/span> \u2713 <\/span>Correct:<\/b> Tighten to recommended torque; pipe should slide with moderate hand pressure<\/span><\/p>\n

                                          Mistake #3: Insufficient Guide Spacing<\/b><\/h3>\n

                                          \u274c <\/span>Wrong:<\/b> Placing guides too far apart (>8m), allowing pipe to buckle laterally<\/span>
                                          \n<\/span> \u2713 <\/span>Correct:<\/b> Follow spacing guidelines (3\u20136m depending on pipe size)<\/span><\/p>\n

                                          Mistake #4: No Anchors in System<\/b><\/h3>\n

                                          \u274c <\/span>Wrong:<\/b> Using all guides with no fixed anchors \u2013 pipe “walks” along run<\/span>
                                          \n<\/span> \u2713 <\/span>Correct:<\/b> Install fixed anchors at ends and direction changes; use guides between anchors<\/span><\/p>\n

                                          Mistake #5: First Guide Too Far from Anchor<\/b><\/h3>\n

                                          \u274c <\/span>Wrong:<\/b> First guide >5m from anchor \u2013 pipe may buckle near anchor<\/span>
                                          \n<\/span> \u2713 <\/span>Correct:<\/b> Place first guide 1\u20132m from anchor to establish expansion direction<\/span><\/p>\n

                                          Standards & Certifications<\/b><\/h2>\n
                                            \n
                                          • \u2713 <\/span>Egyptian Mechanical Code<\/b> \u2013 Pipe guidance, thermal expansion accommodation, support spacing<\/span><\/li>\n
                                          • \u2713 <\/span>ASME B31.1<\/b> \u2013 Power piping thermal expansion design (reference standard)<\/span><\/li>\n
                                          • \u2713 <\/span>ASME B31.3<\/b> \u2013 Process piping thermal expansion design (reference standard)<\/span><\/li>\n
                                          • \u2713 <\/span>MSS SP-58<\/b> \u2013 Pipe support classification (guide category)<\/span><\/li>\n
                                          • \u2713 <\/span>ASTM B633<\/b> \u2013 Electro-Galvanized coating specification (12\u201325 \u03bcm)<\/span><\/li>\n
                                          • \u2713 <\/span>ASTM A153<\/b> \u2013 Hot-Dip Galvanized coating specification (\u226555 \u03bcm)<\/span><\/li>\n
                                          • \u2713 <\/span>Egyptian Standard ES 138<\/b> \u2013 Mild steel material classification (equivalent to ASTM A36)<\/span><\/li>\n
                                          • \u2713 <\/span>ISO 9001:2015<\/b> \u2013 Quality management system certification<\/span><\/li>\n<\/ul>\n

                                            Engineering Support<\/b><\/h2>\n

                                            Technical Assistance:<\/b><\/p>\n

                                              \n
                                            • Thermal expansion calculation verification<\/span><\/li>\n
                                            • Guide spacing recommendations based on pipe size and temperature<\/span><\/li>\n
                                            • Anchor and guide location layout review<\/span><\/li>\n
                                            • Strut channel framework design coordination<\/span><\/li>\n
                                            • Lateral load analysis for seismic or wind conditions<\/span><\/li>\n
                                            • On-site installation guidance and troubleshooting<\/span><\/li>\n<\/ul>\n

                                              Response Time:<\/b> Technical queries answered within 24 hours<\/span><\/p>\n

                                              After-Sales Support:<\/b> Product issue resolution, installation assistance, fast replacement for defects<\/span><\/p>\n

                                              Custom Solutions:<\/b> Special sizes for non-standard pipe diameters, heavy-duty versions for large pipes, custom finishes for specific environments<\/span><\/p>\n

                                              Support System Design Checklist<\/b><\/h2>\n

                                              When designing a piping system with thermal expansion, ensure:<\/span><\/p>\n

                                              \u2610 Thermal expansion calculations performed per ASME B31.1\/B31.3<\/span>
                                              \n<\/span> \u2610 Anchor locations identified and marked on drawings<\/span>
                                              \n<\/span> \u2610 Guide spacing calculated based on pipe size and lateral stability<\/span>
                                              \n<\/span> \u2610 Load-bearing supports specified separately (hangers, riser clamps, etc.)<\/span>
                                              \n<\/span> \u2610 First guide placed close to anchor (1\u20132m) to direct expansion<\/span>
                                              \n<\/span> \u2610 Strut channel framework adequately braced for lateral guide forces<\/span>
                                              \n<\/span> \u2610 Adequate clearance provided for insulation (if applicable)<\/span>
                                              \n<\/span> \u2610 Expansion loops or expansion joints included where required<\/span>
                                              \n<\/span> \u2610 Movement indicators specified to monitor system performance<\/span>
                                              \n<\/span> \u2610 Contractor understands difference between anchor, guide, and support<\/span><\/p>\n

                                              Trusted on Major Projects<\/b><\/h2>\n

                                              New Age Strut Clamps \u2013 Two Piece Channel Clip are specified across Egypt’s most demanding MEP installations:<\/span><\/p>\n

                                                \n
                                              • New Administrative Capital \u2013 Government building HVAC distribution systems<\/span><\/li>\n
                                              • Opera House Complex \u2013 Fire protection and mechanical piping<\/span><\/li>\n
                                              • Military Complex Projects \u2013 Secure facility utility distribution<\/span><\/li>\n
                                              • New Giza Development \u2013 High-rise chilled water and heating systems<\/span><\/li>\n
                                              • Industrial Manufacturing Plants \u2013 Process piping with thermal cycling<\/span><\/li>\n
                                              • Petroleum Refineries \u2013 Hot process piping support racks<\/span><\/li>\n
                                              • Data Centers \u2013 Precision cooling system piping<\/span><\/li>\n
                                              • Hospitals \u2013 Medical facility HVAC and utility piping<\/span><\/li>\n
                                              • Metro Stations \u2013 Tunnel utility distribution with temperature extremes<\/span><\/li>\n<\/ul>\n

                                                Trusted by leading contractors: Orascom Construction, Hassan Allam Holding, Arab Contractors<\/span><\/i><\/p>\n

                                                NEW AGE<\/b><\/h1>\n

                                                \u062f\u0639\u0645 \u0645\u0627 \u064a\u0628\u0646\u064a \u0627\u0644\u0645\u0633\u062a\u0642\u0628\u0644<\/span><\/i><\/p>\n

                                                100% Egyptian Manufacturing | ISO 9001:2015 Certified | Trusted by Egypt’s Top Contractors<\/span><\/p>","protected":false},"excerpt":{"rendered":"

                                                STRUT CLAMP \u2013 TWO PIECE CHANNEL CLIP | NAC-TPCC Series<\/b><\/h2>\n

                                                Pipe Guide … <\/p>","protected":false},"featured_media":2724,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[96],"product_tag":[],"class_list":{"0":"post-2646","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hvac-solutions","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"acf":[],"_links":{"self":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product\/2646","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/comments?post=2646"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/media\/2724"}],"wp:attachment":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/media?parent=2646"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_brand?post=2646"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_cat?post=2646"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_tag?post=2646"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}