{"id":2621,"date":"2025-10-29T18:45:51","date_gmt":"2025-10-29T18:45:51","guid":{"rendered":"https:\/\/new-ageco.com\/?post_type=product&p=2621"},"modified":"2025-10-30T19:19:06","modified_gmt":"2025-10-30T19:19:06","slug":"pipe-hanger-without-lining","status":"publish","type":"product","link":"https:\/\/new-ageco.com\/ar\/product\/pipe-hanger-without-lining\/","title":{"rendered":"PIPE HANGER WITHOUT LINING"},"content":{"rendered":"

Product Designation System<\/b><\/h3>\n

NAC-SUP-2XX | NAC = New Age Corporation | SUP = Suspended Pipe Hanger | 2XX = Standard (non-lined) series<\/b><\/p>\n

Complete Technical Specifications<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n
Specification<\/b><\/td>\nDetails<\/b><\/td>\nSpecification<\/b><\/td>\nDetails<\/b><\/td>\n<\/tr>\n
Material (Clamp)<\/b><\/td>\nMild Steel (ES 138 \/ A36)<\/span><\/td>\nConstruction<\/b><\/td>\nTwo-piece steel clamp<\/span><\/td>\n<\/tr>\n
Lining<\/b><\/td>\nNone (metal-to-metal contact)<\/span><\/td>\nPipe Size Range<\/b><\/td>\nDN15 to DN200 (\u00bd” to 8″)<\/span><\/td>\n<\/tr>\n
Finish Options<\/b><\/td>\nElectro-Galv \/ Hot-Dip \/ Pre-Galv \/ Plain<\/span><\/td>\nOperating Temp<\/b><\/td>\n-20\u00b0C to +150\u00b0C<\/span><\/td>\n<\/tr>\n
Mounting Method<\/b><\/td>\nThreaded rod (M8, M10, M12, M16)<\/span><\/td>\nInstallation<\/b><\/td>\nBefore or after pipe placement<\/span><\/td>\n<\/tr>\n
Rod Connection<\/b><\/td>\nTop-mounted threaded bore<\/span><\/td>\nSide Screw<\/b><\/td>\nM6 \u00d7 16 (all sizes)<\/span><\/td>\n<\/tr>\n
Clamp Thickness<\/b><\/td>\n2.0\u20132.5mm (size dependent)<\/span><\/td>\nStandards<\/b><\/td>\nEgyptian Code \/ MSS SP-58<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Load Capacity & Support Spacing Guidelines<\/b><\/h2>\n

The following load capacities are based on a 3:1 safety factor for suspended horizontal piping using proper threaded rod and ceiling anchors in concrete. Non-lined hangers transfer load directly without vibration isolation.<\/span><\/i><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Product Code<\/b><\/td>\nPipe Size<\/b><\/td>\nPipe OD Range (mm)<\/b><\/td>\nMax Load<\/b><\/td>\nMax Spacing<\/b><\/td>\nRod Size<\/b><\/td>\nTop Nut<\/b><\/td>\nHanger Bolt<\/b><\/td>\n<\/tr>\n
NAC-SUP201<\/b><\/td>\n\u00bd” (DN15)<\/span><\/td>\n20\u201324 mm<\/span><\/td>\n520 kg<\/b><\/td>\n2.5 m<\/span><\/td>\nM8<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP202<\/b><\/td>\n\u00be” (DN20)<\/span><\/td>\n25\u201328 mm<\/span><\/td>\n520 kg<\/b><\/td>\n2.5 m<\/span><\/td>\nM8<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP203<\/b><\/td>\n1″ (DN25)<\/span><\/td>\n32\u201335 mm<\/span><\/td>\n520 kg<\/b><\/td>\n2.8 m<\/span><\/td>\nM8<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP204<\/b><\/td>\n1\u00bc” (DN32)<\/span><\/td>\n39\u201346 mm<\/span><\/td>\n520 kg<\/b><\/td>\n3.0 m<\/span><\/td>\nM8\/M10<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP205<\/b><\/td>\n1\u00bd” (DN40)<\/span><\/td>\n48\u201353 mm<\/span><\/td>\n520 kg<\/b><\/td>\n3.0 m<\/span><\/td>\nM10<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP206<\/b><\/td>\n2″ (DN50)<\/span><\/td>\n59\u201366 mm<\/span><\/td>\n580 kg<\/b><\/td>\n3.0 m<\/span><\/td>\nM10<\/span><\/td>\nM8<\/span><\/td>\nM8 \u00d7 80<\/span><\/td>\n<\/tr>\n
NAC-SUP207<\/b><\/td>\n2\u00bd” (DN65)<\/span><\/td>\n74\u201380 mm<\/span><\/td>\n680 kg<\/b><\/td>\n3.2 m<\/span><\/td>\nM10<\/span><\/td>\nM10<\/span><\/td>\nM10 \u00d7 100<\/span><\/td>\n<\/tr>\n
NAC-SUP208<\/b><\/td>\n3″ (DN80)<\/span><\/td>\n87\u201394 mm<\/span><\/td>\n720 kg<\/b><\/td>\n3.5 m<\/span><\/td>\nM10\/M12<\/span><\/td>\nM10<\/span><\/td>\nM10 \u00d7 100<\/span><\/td>\n<\/tr>\n
NAC-SUP209<\/b><\/td>\n4″ (DN100)<\/span><\/td>\n107\u2013115 mm<\/span><\/td>\n800 kg<\/b><\/td>\n3.5 m<\/span><\/td>\nM12<\/span><\/td>\nM10<\/span><\/td>\nM10 \u00d7 100<\/span><\/td>\n<\/tr>\n
NAC-SUP210<\/b><\/td>\n6″ (DN150)<\/span><\/td>\n162\u2013170 mm<\/span><\/td>\n1,000 kg<\/b><\/td>\n3.8 m<\/span><\/td>\nM12\/M16<\/span><\/td>\nM10<\/span><\/td>\nM10 \u00d7 100<\/span><\/td>\n<\/tr>\n
NAC-SUP211<\/b><\/td>\n8″ (DN200)<\/span><\/td>\n215\u2013225 mm<\/span><\/td>\n1,200 kg<\/b><\/td>\n4.0 m<\/span><\/td>\nM16<\/span><\/td>\nM10<\/span><\/td>\nM10 \u00d7 100<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: Load capacities are higher than lined hangers due to rigid metal-to-metal contact. Spacing may vary based on fluid density, insulation weight (if added later), and code requirements. For fire protection systems, consult NFPA 13 or Egyptian Fire Code for specific spacing requirements.<\/span><\/i><\/p>\n

Dimensional Specifications<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Code<\/b><\/td>\nPipe Size<\/b><\/td>\nClamp Range (mm)<\/b><\/td>\nThickness \u00d7 Width<\/b><\/td>\nSide Screw<\/b><\/td>\nWeight (approx)<\/b><\/td>\n<\/tr>\n
NAC-SUP201<\/b><\/td>\n\u00bd” (DN15)<\/span><\/td>\n20\u201324<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n240 g<\/span><\/td>\n<\/tr>\n
NAC-SUP202<\/b><\/td>\n\u00be” (DN20)<\/span><\/td>\n25\u201328<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n280 g<\/span><\/td>\n<\/tr>\n
NAC-SUP203<\/b><\/td>\n1″ (DN25)<\/span><\/td>\n32\u201335<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n340 g<\/span><\/td>\n<\/tr>\n
NAC-SUP204<\/b><\/td>\n1\u00bc” (DN32)<\/span><\/td>\n39\u201346<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n420 g<\/span><\/td>\n<\/tr>\n
NAC-SUP205<\/b><\/td>\n1\u00bd” (DN40)<\/span><\/td>\n48\u201353<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n480 g<\/span><\/td>\n<\/tr>\n
NAC-SUP206<\/b><\/td>\n2″ (DN50)<\/span><\/td>\n59\u201366<\/span><\/td>\n2.0 \u00d7 20 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n620 g<\/span><\/td>\n<\/tr>\n
NAC-SUP207<\/b><\/td>\n2\u00bd” (DN65)<\/span><\/td>\n74\u201380<\/span><\/td>\n2.0 \u00d7 25 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n780 g<\/span><\/td>\n<\/tr>\n
NAC-SUP208<\/b><\/td>\n3″ (DN80)<\/span><\/td>\n87\u201394<\/span><\/td>\n2.0 \u00d7 25 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n1.0 kg<\/span><\/td>\n<\/tr>\n
NAC-SUP209<\/b><\/td>\n4″ (DN100)<\/span><\/td>\n107\u2013115<\/span><\/td>\n2.0 \u00d7 25 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n1.5 kg<\/span><\/td>\n<\/tr>\n
NAC-SUP210<\/b><\/td>\n6″ (DN150)<\/span><\/td>\n162\u2013170<\/span><\/td>\n2.5 \u00d7 25 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n2.6 kg<\/span><\/td>\n<\/tr>\n
NAC-SUP211<\/b><\/td>\n8″ (DN200)<\/span><\/td>\n215\u2013225<\/span><\/td>\n2.5 \u00d7 30 mm<\/span><\/td>\nM6 \u00d7 16<\/span><\/td>\n3.8 kg<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Material & Finish Specifications<\/b><\/h2>\n

Steel Clamp Body<\/b><\/h3>\n\n\n\n\n\n\n\n
Finish Type<\/b><\/td>\nCoating Specification<\/b><\/td>\nRecommended Application<\/b><\/td>\n<\/tr>\n
Electro-Galvanized (EG)<\/b><\/td>\n12\u201325 \u03bcm per ASTM B633<\/span><\/td>\nIndoor mechanical rooms, dry environments<\/span><\/td>\n<\/tr>\n
Hot-Dip Galvanized (HDG)<\/b><\/td>\n\u226555 \u03bcm per ASTM A153<\/span><\/td>\nOutdoor, coastal zones, fire protection systems, high-humidity areas<\/span><\/td>\n<\/tr>\n
Pre-Galvanized (PG)<\/b><\/td>\nStandard mill coating<\/span><\/td>\nGeneral construction, moderate indoor conditions<\/span><\/td>\n<\/tr>\n
Plain (Uncoated)<\/b><\/td>\nNo coating<\/span><\/td>\nPaint-ready installations or controlled environments<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Suspended Support Application<\/b><\/h2>\n

The Pipe Hanger Without Lining is specifically designed for <\/span>overhead piping systems that do not require vibration isolation<\/b>, providing:<\/span><\/p>\n

Primary Functions<\/b><\/h3>\n
    \n
  • Carries full suspended pipe weight plus fluid load through rigid steel clamp<\/span><\/li>\n
  • Direct load transfer to threaded rod without intermediate dampening<\/span><\/li>\n
  • Maintains continuous pipe alignment across long suspended runs<\/span><\/li>\n
  • Suitable for both horizontal ceiling-mounted and vertical wall-suspended applications<\/span><\/li>\n<\/ul>\n

    Key Performance Characteristics<\/b><\/h3>\n
      \n
    • High Load Capacity:<\/b> Up to 1,200 kg per support point (DN200\/8″)<\/span><\/li>\n
    • Rigid Support:<\/b> No compression or movement \u2013 pipe remains stationary<\/span><\/li>\n
    • Installation Flexibility:<\/b> Can be installed before pipe placement or opened around existing pipe<\/span><\/li>\n
    • Temperature Range:<\/b> -20\u00b0C to +150\u00b0C (steel-dependent, not limited by rubber)<\/span><\/li>\n
    • Cost-Effective:<\/b> Lower cost than lined hangers when vibration isolation not required<\/span><\/li>\n<\/ul>\n

      Typical Installation Locations<\/b><\/h3>\n
        \n
      • Fire protection sprinkler mains and standpipe risers<\/span><\/li>\n
      • Domestic cold\/hot water distribution (non-insulated)<\/span><\/li>\n
      • HVAC chilled water and heating water lines (uninsulated)<\/span><\/li>\n
      • Industrial process piping (static systems)<\/span><\/li>\n
      • Roof drainage and stormwater piping<\/span><\/li>\n
      • Equipment room overhead distribution<\/span><\/li>\n<\/ul>\n

        Application Selection Guide<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n
        System<\/b><\/td>\nTypical Use<\/b><\/td>\nRecommended Sizes<\/b><\/td>\nFinish<\/b><\/td>\nWhy Non-Lined<\/b><\/td>\n<\/tr>\n
        Fire Protection<\/b><\/td>\nSprinkler mains, standpipes<\/span><\/td>\nDN50\u2013DN200<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\nHigh load capacity, code-compliant spacing<\/span><\/td>\n<\/tr>\n
        Domestic Water (Uninsulated)<\/b><\/td>\nCeiling distribution runs<\/span><\/td>\nDN25\u2013DN65<\/span><\/td>\nElectro-Galvanized<\/span><\/td>\nCost-effective for non-acoustic areas<\/span><\/td>\n<\/tr>\n
        HVAC (Uninsulated)<\/b><\/td>\nEquipment rooms, plant areas<\/span><\/td>\nDN40\u2013DN150<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\nRigid support for heavy water-filled lines<\/span><\/td>\n<\/tr>\n
        Industrial Process<\/b><\/td>\nStatic piping, no vibration source<\/span><\/td>\nDN32\u2013DN100<\/span><\/td>\nPlain or HDG<\/span><\/td>\nTemperature-stable steel construction<\/span><\/td>\n<\/tr>\n
        Roof Drainage<\/b><\/td>\nSuspended drain leaders<\/span><\/td>\nDN50\u2013DN100<\/span><\/td>\nHot-Dip Galvanized<\/span><\/td>\nWeather-resistant, high flow capacity<\/span><\/td>\n<\/tr>\n
        Utility Piping<\/b><\/td>\nGeneral service distribution<\/span><\/td>\nDN25\u2013DN80<\/span><\/td>\nPre-Galvanized<\/span><\/td>\nStandard support for multi-trade installs<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

        Installation Requirements<\/b><\/h2>\n

        Pre-Installation Checklist<\/b><\/h3>\n
          \n
        • Calculate total pipe weight: (pipe + fluid + any future insulation) \u00d7 length between supports<\/span><\/li>\n
        • Verify ceiling anchor capacity: minimum 3\u00d7 calculated load per support point<\/span><\/li>\n
        • Select proper rod size per load table (M8 for light loads, M12\/M16 for heavy mains)<\/span><\/li>\n
        • Confirm clamp size accommodates pipe OD (including any coatings or protective wrap)<\/span><\/li>\n
        • Ensure threaded rod length accounts for adjustment range and nut engagement<\/span><\/li>\n<\/ul>\n

          Installation Procedure<\/b><\/h3>\n
            \n
          1. Install ceiling anchor and threaded rod<\/b><\/li>\n<\/ol>\n

            Use concrete expansion anchors (5 MPa minimum substrate strength) or structural beam clamps rated for load<\/span>
            \n<\/span> Rod length = ceiling height to pipe centerline + adjustment allowance (typically 150\u2013300mm)<\/span><\/p>\n

              \n
            1. Prepare pipe hanger assembly<\/b><\/li>\n<\/ol>\n

              Open clamp by removing M6 \u00d7 16 side screw<\/span>
              \n<\/span> Inspect clamp interior for debris, sharp edges, or damage<\/span>
              \n<\/span> Verify rod thread engagement into top bore (minimum 3 full threads)<\/span><\/p>\n

                \n
              1. Position pipe in clamp<\/b><\/li>\n<\/ol>\n

                Lift pipe into position or open clamp around existing pipe<\/span>
                \n<\/span> Center pipe in clamp channel \u2013 ensure pipe sits fully in clamp cradle<\/span><\/p>\n

                  \n
                1. Close and secure clamp<\/b><\/li>\n<\/ol>\n

                  Align clamp halves and insert M6 \u00d7 16 side screw<\/span>
                  \n<\/span> Tighten gradually and evenly to avoid pipe deformation<\/span>
                  \n<\/span> Recommended torque: 10\u201312 Nm for M6 side screw<\/span>
                  \n<\/span> WARNING:<\/b> Over-tightening can dent thin-wall pipes \u2013 use torque wrench for critical applications<\/span><\/p>\n

                    \n
                  1. Verify alignment and load distribution<\/b><\/li>\n<\/ol>\n

                    Check pipe alignment with laser level or string line across multiple supports<\/span>
                    \n<\/span> Adjust threaded rod length for proper elevation (lock nuts top and bottom)<\/span>
                    \n<\/span> Confirm spacing matches design spacing table<\/span>
                    \n<\/span> Verify no pipe sag or misalignment between support points<\/span><\/p>\n

                    Why Specify New Age Pipe Hangers Without Lining?<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n
                    Advantage<\/b><\/td>\nBenefit to Your Project<\/b><\/td>\n<\/tr>\n
                    High Load Capacity<\/b><\/td>\nUp to 1,200 kg per support \u2013 handles heavy fire protection and HVAC mains without intermediate supports<\/span><\/td>\n<\/tr>\n
                    No Vibration Components<\/b><\/td>\nSimplified design = fewer parts to fail, longer service life in static systems<\/span><\/td>\n<\/tr>\n
                    Wide Temperature Range<\/b><\/td>\n-20\u00b0C to +150\u00b0C \u2013 all-steel construction not limited by rubber temperature ratings<\/span><\/td>\n<\/tr>\n
                    Cost-Effective<\/b><\/td>\nLower cost than lined hangers when acoustic isolation not required \u2013 optimizes project budget<\/span><\/td>\n<\/tr>\n
                    Flexible Installation<\/b><\/td>\nOpen-clamp design allows installation on existing piping without disassembly<\/span><\/td>\n<\/tr>\n
                    100% Egyptian Manufacturing<\/b><\/td>\n3\u20137 day delivery (Cairo\/Giza), local technical support, competitive pricing vs. imports<\/span><\/td>\n<\/tr>\n
                    Certified Galvanization<\/b><\/td>\nLong service life in mechanical rooms, outdoor applications, and coastal environments<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    Product Comparison: Lined vs. Non-Lined Hangers<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n
                    Feature<\/b><\/td>\nPipe Hanger WITHOUT Lining<\/b><\/td>\nPipe Hanger WITH EPDM Lining<\/b><\/td>\n<\/tr>\n
                    Vibration Isolation<\/b><\/td>\n\u2717 None \u2013 rigid support<\/span><\/td>\n\u2713 EPDM isolates vibration<\/span><\/td>\n<\/tr>\n
                    Noise Reduction<\/b><\/td>\nNone<\/span><\/td>\nUp to 18 dB<\/span><\/td>\n<\/tr>\n
                    Load Capacity<\/b><\/td>\nHigher (520\u20131,200 kg)<\/span><\/td>\nLower (460\u2013950 kg)<\/span><\/td>\n<\/tr>\n
                    Temperature Range<\/b><\/td>\n-20\u00b0C to +150\u00b0C<\/span><\/td>\n-20\u00b0C to +110\u00b0C (EPDM limit)<\/span><\/td>\n<\/tr>\n
                    Cost<\/b><\/td>\nLower<\/span><\/td>\nHigher<\/span><\/td>\n<\/tr>\n
                    Best For<\/b><\/td>\nFire, domestic water, static HVAC<\/span><\/td>\nOccupied spaces, pump-fed systems<\/span><\/td>\n<\/tr>\n
                    Installation Complexity<\/b><\/td>\nStandard<\/span><\/td>\nMust avoid over-compressing EPDM<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    Installation Location Guide<\/b><\/h2>\n

                    Use Non-Lined Hangers For:<\/b><\/h3>\n

                    \u2713 Fire protection systems (code-required rigid support)<\/span>
                    \n<\/span> \u2713 Equipment rooms and plant areas (acoustic comfort not critical)<\/span>
                    \n<\/span> \u2713 Outdoor or weather-exposed piping (steel-only construction more durable)<\/span>
                    \n<\/span> \u2713 High-temperature applications (>110\u00b0C, above EPDM limit)<\/span>
                    \n<\/span> \u2713 Budget-conscious projects where vibration not a concern<\/span>
                    \n<\/span> \u2713 Static piping without pumps or compressors nearby<\/span><\/p>\n

                    Use Lined Hangers Instead For:<\/b><\/h3>\n

                    \u2717 Office ceilings, hotels, hospitals (acoustic-sensitive spaces)<\/span>
                    \n<\/span> \u2717 Piping near pumps, chillers, or other vibration sources<\/span>
                    \n<\/span> \u2717 Residential or occupied areas above ceilings<\/span>
                    \n<\/span> \u2717 Systems with frequent thermal cycling (EPDM prevents chatter)<\/span><\/p>\n

                    Standards & Certifications<\/b><\/h2>\n
                      \n
                    • \u2713 <\/span>Egyptian Mechanical Code<\/b> \u2013 Suspended support spacing, load calculations, hanger selection<\/span><\/li>\n
                    • \u2713 <\/span>NFPA 13<\/b> \u2013 Fire protection system support requirements (where applicable)<\/span><\/li>\n
                    • \u2713 <\/span>MSS SP-58<\/b> \u2013 Pipe hanger types and geometry equivalence<\/span><\/li>\n
                    • \u2713 <\/span>ASTM B633<\/b> \u2013 Electro-Galvanized coating specification (12\u201325 \u03bcm)<\/span><\/li>\n
                    • \u2713 <\/span>ASTM A153<\/b> \u2013 Hot-Dip Galvanized coating specification (\u226555 \u03bcm)<\/span><\/li>\n
                    • \u2713 <\/span>Egyptian Standard ES 138<\/b> \u2013 Mild steel material classification (equivalent to ASTM A36)<\/span><\/li>\n
                    • \u2713 <\/span>ISO 9001:2015<\/b> \u2013 Quality management system certification<\/span><\/li>\n<\/ul>\n

                      Engineering Support<\/b><\/h2>\n

                      Technical Assistance:<\/b><\/p>\n

                        \n
                      • Load calculation verification (pipe weight + fluid + insulation if added)<\/span><\/li>\n
                      • Support spacing recommendations per system type and local codes<\/span><\/li>\n
                      • Rod size and ceiling anchor specification for project-specific loads<\/span><\/li>\n
                      • Fire protection system compliance verification (NFPA 13, Egyptian Fire Code)<\/span><\/li>\n
                      • Thermal expansion analysis and hanger placement strategy<\/span><\/li>\n
                      • On-site installation guidance and contractor coordination<\/span><\/li>\n<\/ul>\n

                        Response Time:<\/b> Technical queries answered within 24 hours<\/span><\/p>\n

                        After-Sales Support:<\/b> Product issue resolution, installation troubleshooting, fast replacement for defects<\/span><\/p>\n

                        Custom Solutions:<\/b> Special sizes, finishes, or clamp configurations available for unique project requirements<\/span><\/p>\n

                        Support Limitations & Alternative Products<\/b><\/h2>\n

                        When NOT to Use Pipe Hanger Without Lining<\/b><\/h3>\n

                        \u274c <\/span>Acoustic-sensitive spaces<\/b> (hospitals, hotels, offices above occupied areas)<\/span>
                        \n<\/span> \u274c <\/span>Piping near vibration sources<\/b> (pumps, chillers, compressors)<\/span>
                        \n<\/span> \u274c <\/span>Thermal expansion chatter<\/b> (systems with frequent temperature cycling in occupied spaces)<\/span>
                        \n<\/span> \u274c <\/span>Wall-mounted vertical risers<\/b> (use saddle-type supports instead)<\/span><\/p>\n

                        Recommended Alternatives<\/b><\/h3>\n

                        For applications requiring different support characteristics:<\/span><\/p>\n

                          \n
                        • Acoustic comfort required:<\/b> Use Pipe Hanger with EPDM Lining (NAC-SUP-1XX series)<\/span><\/li>\n
                        • Wall-mounted risers:<\/b> Use Half Saddle (NAC-HS) or Light Saddle (NAC-LS)<\/span><\/li>\n
                        • Adjustable height support:<\/b> Use clevis-type hangers with threaded rod<\/span><\/li>\n
                        • Heavy mains with sway bracing:<\/b> Add lateral restraints per seismic code<\/span><\/li>\n<\/ul>\n

                          Trusted on Major Projects<\/b><\/h2>\n

                          New Age Pipe Hangers Without Lining are specified across Egypt’s most demanding infrastructure:<\/span><\/p>\n

                            \n
                          • New Administrative Capital \u2013 Fire protection and utility distribution<\/span><\/li>\n
                          • Opera House Complex \u2013 Non-acoustic mechanical spaces<\/span><\/li>\n
                          • Military Complex Projects \u2013 Fire suppression and service piping<\/span><\/li>\n
                          • New Giza Development \u2013 High-rise domestic water and HVAC<\/span><\/li>\n
                          • Upper Egypt Infrastructure \u2013 Hospital and facility utility systems<\/span><\/li>\n
                          • Industrial Plants \u2013 Process piping in manufacturing facilities<\/span><\/li>\n
                          • Petroleum Facilities \u2013 Static pipeline distribution systems<\/span><\/li>\n<\/ul>\n

                            Trusted by leading contractors: Orascom Construction, Hassan Allam Holding, Arab Contractors<\/span><\/i><\/p>\n

                            NEW AGE<\/b><\/h1>\n

                            \u062f\u0639\u0645 \u0645\u0627 \u064a\u0628\u0646\u064a \u0627\u0644\u0645\u0633\u062a\u0642\u0628\u0644<\/span><\/i><\/p>\n

                            100% Egyptian Manufacturing | ISO 9001:2015 Certified | Trusted by Egypt’s Top Contractors<\/span><\/p>","protected":false},"excerpt":{"rendered":"

                            PIPE HANGER WITHOUT LINING | NAC-SUP-2XX Series<\/b><\/h2>\n

                            Standard Suspended Pipe Support | … <\/p>","protected":false},"featured_media":2691,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[],"product_cat":[96],"product_tag":[],"class_list":{"0":"post-2621","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-hvac-solutions","8":"first","9":"instock","10":"shipping-taxable","11":"product-type-simple"},"acf":[],"_links":{"self":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product\/2621","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/comments?post=2621"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/media\/2691"}],"wp:attachment":[{"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/media?parent=2621"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_brand?post=2621"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_cat?post=2621"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/new-ageco.com\/ar\/wp-json\/wp\/v2\/product_tag?post=2621"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}